capacitor tripping device

SPECIFICATION OF CAPACITOR TRIPPING DEVICE (POWER PACK) FOR 30V  FOR OUTDOOR BREAKER

APPLICATION: This will be mounted below the mechanism box of breaker. There      will be vibration (<1g) during the close/open operation of the breaker.

TECHNICAL SPECIFICATION

1. Input Supply                                             :   220V +/- 10% AC, 50Hz Single phase.
2. DC Output                                                :   32V DC
3. Max.No Load Voltage                             :   33V DC
4. Connected burden                                  :   300W for 0.2 sec
5. Charge Storage                                       :   >60 mm
6. Terminals                                                 :   Suitable for 2.5 Sqmm PVC cable
7. HV withstand                                            :   2KV 50 HZ each terminal other being not connected.
8. Max.dimensions Basic Unit                  :   254mm L X 150mm D X 130mm H
9.Finnish                                                       :   Powder Coated metal cabinet
10. Terminal details                                    :   1,2 : 1 Phase 240V AC Input 5,6  & 7,8  30V DC  Out Put
11. Ambient Condition                                :   45 C & 97% RH Water Condensation Should not Occure
12. Capacitance Value                               :   140000MF/50V DC
13.  Stored Energy                                       :   70 Joules
14. Charge Time                                          :   15 Sec
15. Discharge Time                                     :   10 Sec (Used from Front panel push button)
16. Delay                                                        :   0.6 Sec.



SPECIFICATION OF CAPACITOR TRIPPING DEVICE (POWER PACK) FOR 110V  FOR OUTDOOR BREAKER


APPLICATION: This will be mounted below the mechanism box of breaker. There will be vibration (<1g) during the close/open operation of the breaker.

TECHNICAL SPECIFICATION
1. Input Supply                                                :   230V + 10% AC, 50Hz Single phase.
2. DC Output                                                   :   110V DC  (+10% -15%) Dual output with galvanic isolation
3. Max.No Load Voltage                                :   121V DC
4. Connected burden                                    :   300W – sec (each output)
5. Charge Storage                                         :   >60 mm
6. Terminals                                                   :   Suitable for 2.5 Sq mm PVC cable
7. HV withstand                                              :   2KV 50Hz for 1 mint each terminals.
8. Max. Dimensions Basic Unit                   :   L 370mm X W 170mm X H 140mm
9. Finnish                                                         :   Powder Coated white color metal cabinet
10. Terminal details                                      :   1,2 : 1 Phase 230V AC Input 5,6  & 7,8  110V DC  Out Put
11. Ambient Condition                                  :  50 C & 97+ 3% relative humidity.
12. Capacitance Value                                  :  10800MF/200V DC Each Bank
13.  Stored Energy                                         :   65.3 Joules Each Bank
14. Charge Time                                            :   20 Sec
15. Discharge Time                                       :   10 Sec (Used from Front panel push button)
16. Number of Operations                           :   3
17. Indication Lamp 1                                    :   Closing Cap. Bank Healthy (Green)
18. Indication Lamp 2                                    :  Tripping Cap. Bank Healthy (Green)
19. Indication Lamp 3                                     :  AC ON (Red)
20. Push Button 1                                            :  Closing cap. Bank Healthy Test
21. Push Button 2                                            :  Tripping Cap. Bank Healthy Test
22. Push Button 3                                            :  Discharge Closing Cap. Bank  
23. Push Button 4                                            :  Discharge Tripping Cap. Bank  


SPECIFICATION OF CAPACITOR TRIPPING DEVICE (POWER PACK) FOR 220V  FOR OUTDOOR BREAKER

APPLICATION: This will be mounted below the mechanism box of breaker. There will be vibration (<1g) during the close/open operation of the breaker.

CAPACITOR TRIPPING DEVICE

TECHNICAL SPECIFICATION

1. Input Supply                                               :         220 VDC +10% to -30% i.e. 242VDC TO 154VDC
2. DC Output Supply                                     :         220VDC (+10%), single out put
3. Connected burden                                   :         300W (for 0.1 sec) for out put circuit
4. Charging Time                                          :        <10 Seconds
5. Off Time                                                      :        >30 Minutes
6. Terminals                                                   :        Stud type, suitable for termination of2.5 sq mm PVC cable
7. H.V. withstand                                           :       2KV, 50 Hz  for 1 min. (each terminals shall individually withstand this test)
8. Max. Dimensions                                      :        110L X  135W X 100H MM  
9.Box Fixing Dimensions                             :        150L X 100W (Hole Size 7mm)
9. Housing                                                      :        2 mm Powder Coated metal cabinet
10. Terminal Marking                                    :        220VDC input 5 (+VE)   &  6 (-VE) 220VDC output 7 (-VE)   &   8 (+VE)
11. Ambient Condition                                  :        45 C at 100% relative humidity
12. Capacitor                                                   :       3330 MFD/250V DC
13.  Dc under volt relay (Pla OR Code)      :         Provided
14. RED LED (DC supply fails indication)   :      Press to see
15. GREEN LED (DC supply healthy indication)     :   Press to see
16. Push to “ON” Switch                                :         RED & GREEN LED for indication
17. Earthing terminal                                      :         Provide

Contact Persons

    For any queries, feedback please contact

  • L PULLA REDDY
    +91 9848030448

    V RAMESH KUMAR
    +91 9490755519


Contact Us

Kindly Feel Free to Contact.

Address: #1-7/23/21/A, Plot No. 19,
Line 1:West Jai Santosh Nagar
Line 2: St. No. 8, Habsiguda
City: Hyderabad - 500 007
Telephone: +40 27155383
Fax: +40 2715 3561
E-mail: technoelectronics1234@gmail.com